Konica Minolta BIZHUB C450 User Manual
Page 126
Specifying Settings From the Control Panel
3
C450
3-15
Sp
ec
ifyin
g
Set
tin
gs
F
ro
m
th
e
Co
nt
ro
l Pa
ne
l
Chapter 3
15
Touch [Index] and touch the desired button.
–
This specifies the characters used to index the destination.
–
For destinations that are often used, specify [Main] at the same
time, and it will be easier to search.
16
Touch [OK].
17
Press the [C] (clear) key to erase the value, and then use the keypad to
type in the port number (between 1 and 65535).
–
To enable PASV mode, touch [PASV Mode].
–
To use a proxy server, touch [Proxy].
–
If a value outside of the allowable range is specified, the message
“Input Error” appears. Type in a value within the allowable range.
18
Touch [OK].
The FTP destination is registered.
2
Note
The registration cannot be completed unless settings have been speci-
fied for “Name”, “Host Address”, “File Path”, “User ID”, and “Password”.
!
Detail
To check the registered destination, touch the button for the destination,
and then touch [Check Setting].
To change the registered destination settings, touch the button for the
desired destination, and then touch [Edit].
To delete the registered destination, touch the button for the desired des-
tination, and then touch [Delete].