Konica Minolta BIZHUB C450 - Manual (Page 191)

3 Specifying Settings From the Control Panel
3-80 C450
Sp
ec
ifyin
g
Set
tin
gs
F
ro
m
th
e
Co
nt
ro
l Pa
ne
l
Chapter 3
Setting Up LDAP screen 5/6
Setting Up LDAP screen 6/6
Item Description
Select Server Authentication
Method Select the method to be used during server authentication.
[Use The Setting Value]: Authenticates the settings speci-
fied in Setting Up LDAP screen 6/6.
[User Authentication]: Requires a user name and password
when using the LDAP search function. When logging on to
the copier with the external server authentication function,
the user name that was used when performing the external
server authentication is automatically entered in the LDAP
server login screen. The user name can also be changed.
[Dynamic Authentication]: Requires a user name and pass-
word when using the LDAP search function.
Use referral Select whether to use the referral setting. When referral is
used, the search base that was specified in LDAP Sever
Setting searches the top and bottom levels as the starting
point.
Item Description
Login Name Sets the login name used to connect to the LDAP server.
Use the keyboard that appears in the touch panel to type in
the name (up to 255 characters).
Password Sets the password used to connect to the LDAP server.
Use the keyboard that appears in the touch panel to type in
the password (up to 128 characters).
Domain Name Sets the domain name used to connect to the LDAP server
as necessary. Use the keyboard that appears in the touch
panel to type in the name (up to 64 characters).
Check Connection Checks the connection to the LDAP server.
Reset All Settings The LDAP server settings can be reset to their factory
default.
When a reset confirmation message appears, touch [Yes].