35 external server authentication, Using active directory, External server authentication -139 – Konica Minolta BIZHUB C450 User Manual

Page 250: Using active directory -139

Advertising
background image

Specifying Settings From the Control Panel

3

C450

3-139

Sp

ec

ifyin

g

Set

tin

gs

F

ro

m

th

e

Co

nt

ro

l Pa

ne

l

Chapter 3

3.35

External Server Authentication

If performing user authentication using an external server, multiple settings
are required depending on the type of server being used. Specify the settings
by using the following procedure as reference.

You can specify the external server authentication settings according to the
network environment that is to be used.

2

Note

In the future, the operating system may be updated or a new operating
system may be released. For details, refer to the manual of the operating
system.

Using Active Directory

Before specifying the settings, prepare the information described below.

Administrator password (required)

MFP IP address (required)

Subnet mask (required)

Default gateway

Priority DNS server address (required)

Substitute 1 DNS server address

Substitute 2 DNS server address

DNS default domain name

DNS host name

Active Directory default domain name (required)

NTP server (Time Adjustment Setting) address

List of the users for authentication (required)

Item

Description (reference)

Active Directory

Specify when using Windows 2000 Server, 2003 Server.

NTLM v1 or NTLM v2

Specify when using Windows NT 4.0 Server. NTLM v2 is
available from Windows NT 4.0 (Service Pack 4).

NDS

Specify when using NetWare 5.1 or NetWare 6.0.

Advertising