Konica Minolta BIZHUB C450 - Manual (Page 98)

Scanning Documents 2
C450 2-65
Scan
nin
g
Do
cu
men
ts
Chapter 2
!
Detail
If a file name is not specified when the data was scanned, it will automat-
ically be specified by combining the mode and the date and time at the
time the file was saved. For specifying the file name, refer to “Specifying
E-Mail Settings” on page 2-73.
2
Note
To clear all of the file names that are displayed, press the [C] (clear) key.
Up to 30 characters can be entered.
To change the file name
1
In the Scan mode screen, touch [Scan Settings].
2
Touch [File Name].
3
Type in the new file name using the keyboard that appears.
4
Touch [OK], and then touch [OK] in the next screen that appears.