Konica Minolta bizhub 362 - Manual (Page 34)

Installing the printer driver 2
362/282/222 2-4
Automatic installation using the installer
With the installer, this machine is detected to determine whether it is con-
nected by USB or is on the same TCP/IP network as the computer, and then
the required printer is automatically installed. You can also manually specify
the printer driver to be installed.
2
Note
Since this machine is automatically detected with a network connection,
be sure to set the IP address of this machine before connecting it. For de-
tails on specifying the settings, refer to “Setting the IP address for this
machine” on page 3-5.
When installing on Windows NT 4.0, 2000, XP, Vista, Server 2003, or
Server 2008, administrator permissions are required.
If the wizard starts up in order to add new hardware with a USB or parallel
connection, click [Cancel].
For IPP printing, the printer driver can be installed when the IPP printing
settings are specified. For further details on IPP printing, refer to “IPP
printing (Windows 2000/XP/Vista/Server 2003/Server 2008)” on
page 3-16.
Installer operating environment
* With Windows NT 4.0, in order to install a machine that is connected directly to a network using
the TCP/IP protocol, Microsoft TCP/IP Printing Service must first be installed on the computer
being used.
Item Operating environment
Operating system Windows NT 4.0 (Service Pack 6a or later), Windows 2000 Pro-
fessional (Service Pack 4 or later), Windows XP Home Edition/
Professional (Service Pack 2 or later), Windows XP Professional
x64 Edition, Windows Vista Home Basic/Home Premium/Ulti-
mate/Business/Enterprise, Windows Vista Home Basic/Home
Premium/Ultimate/Business/Enterprise x64 Edition, Windows
Server 2003 Standard Edition, Windows Server 2003 x64 Edition,
Windows Server 2008 Standard/Enterprise, or Windows Server
2008 Standard/Enterprise x64 Edition
Processor Pentium 300 MHz or higher recommended
Memory 64 MB or more (128 MB or more recommended)