Setting the macintosh computer, Setting the macintosh computer -34 – Konica Minolta bizhub 362 User Manual
Page 92
Advertising
Setting up network printing
3
362/282/222
3-34
5
To apply the settings, restart this machine (turn the main power off,
then on again).
2
Reminder
When turning the machine off, then on again with the main power switch,
wait about 10 seconds to turn the machine on after turning it off. The ma-
chine may not operate correctly if it is turned on immediately after being
turned off.
Setting the Macintosh computer
Use the Macintosh computer that is connected to specify the TCP/IP and
AppleTalk settings.
2
Note
For network settings, consult the network administrator.
For printer driver installation, refer to “Installing the printer driver” on
page 2-1.
Advertising
This manual is related to the following products: