Konica Minolta bizhub 362 - Manual (Page 129)

Setting up the PCL driver 5
362/282/222 5-8
3
Select the desired setting from the “Paper Type” drop-down list, and
then click the [OK] button.
Only the paper types that can be selected in each input tray are dis-
played.
If “Transparency” is selected as the paper type in “Auto” of Paper
Source, you can specify transparency interleaving.
When the “Transparency Interleave” check box is selected, the Trans-
parency Interleave Settings dialog box appears, allowing you to select
the source of the interleaf paper.
The Transparency Interleave Settings dialog box can also be displayed
by clicking the [Settings] button.
Specifying duplex/booklet printing
You can print a document onto both sides of a page or in a booklet format
(two facing pages). This comes in handy when you want to bind multiple-
page documents.
1
Click the Setup tab.
2
From the “Print Type” drop-down list, select “Duplex” or “Booklet”.
2
Note
The binding orientation can be specified from the “Binding Position”
drop-down list.