For windows vista/server 2008, For windows vista/server 2008 -9 – Konica Minolta bizhub 362 User Manual

Page 39

Advertising
background image

Installing the printer driver

2

362/282/222

2-9

For Windows Vista/Server 2008

1

After using a parallel cable or a USB cable to connect this machine to
a computer, turn the main power of this machine on.

Do not disconnect or connect the cable while the computer is start-
ing up.

2

Start the computer.
The Found New Hardware dialog box appears.

If the Found New Hardware Wizard dialog box does not appear,
turn off this machine, then on again.

When turning off the power, then on again, wait at least 10 seconds
before turning it on again. Otherwise, this machine may not function
properly.

3

Click “Locate and install driver software (recommended)”.
The dialog box prompting you to insert the disk appears.

If the disk is not available, click “I don't have the disk. Show me oth-
er options”. In the next window, select “Browse my computer for
driver software (advanced)”, and then specify the desired printer
driver folder.
Konica Minolta PCL driver (VXL): “Driver_Vista\Driver\PCL\Lan-
guage folder\Win_x86 (for a 64-bit operating system, “Win_x64”)”
folder on the Driver CD-ROM Vol.1 PCL Driver
Konica Minolta PostScript driver (VPS): “Driver_Vista\Driv-
er\PS\Language folder\Win_x86 (for a 64-bit operating system,
“Win_x64”)” folder on the Driver CD-ROM Vol.2 PS,Macintosh Driv-
er

4

Insert the printer driver CD-ROM into the computer's CD-ROM drive.

Konica Minolta PCL driver (VXL): Driver CD-ROM Vol.1 PCL Driver

Konica Minolta PostScript driver (VPS): Driver CD-ROM Vol.2
PS,Macintosh Driver

The information on the disk is retrieved. A list of software supporting
this machine appears.

5

Specify the name of the desired printer driver, and then click the [Next]
button.

Printer drivers that can be selected:
Windows Vista/Server 2008: Konica Minolta PCL driver (VXL), Koni-
ca Minolta PostScript driver (VPS)

Advertising
This manual is related to the following products: