Konica Minolta bizhub 20 - Manual (Page 5)

4
- Federal Communications Commission (FCC) Declaration of Conformity (USA only)
Responsible Party: KONICA MINOLTA BUSINESS SOLUTIONS U.S.A., INC.
100 Williams Drive
Ramsey, NJ 07446
Phone: 201-825-4000
declares, that the products
Product Name: bizhub 20
comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
„ Reorient or relocate the receiving antenna.
„ Increase the separation between the equipment and receiver.
„ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
„ Call the dealer or an experienced radio/TV technician for help.
„ This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
IMPORTANT
• Changes or modifications not expressly approved by us could void the user’s authority to operate the equipment.
• A shielded interface cable should be used to ensure compliance with the limits for a Class B digital device.
• This equipment may not be used on coin service lines provided by the telephone company or connected to party
lines.
• We cannot accept any financial or other responsibilities that may be the result of your use of this information,
including direct, special or consequential damages. There are no warranties extended or granted by this
document.
• This machine has been certified to comply with FCC standards, which are applied to the USA only. A grounded
plug should be plugged into a grounded AC power outlet after checking the rating of the local power supply for the
machine to operate properly and safely.
● Industry Canada Compliance Statement (Canada only)
This Class B digital apparatus complies with Canadian ICES–003.
Cet appareil numérique de la classe B est conforme à la norme NMB–003 du Canada.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of this device.
- Special Notice to User - For Canada
NOTICE:
This product meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number is an indication
of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may
consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices does not
exceed five.
AVIS: Le present materiel est conforme aux specifications techniques applicables d'Industrie Canada.
L'indice d'equivalence de la sonnerie (IES) sert a indiquer le nombre maximal de terminaux qui peuvent etre raccordes a une
interface telephonique. La terminaison d'une interface peut consister en une combinaison quelconque de dispositifs, a la
seule condition que la somme d'indices d'equivalence de la sonnerie de tous les dispositifs n'excede pas 5.
● Radio interference
This product complies with EN55022 (CISPR Publication 22)/Class B.
● For European Users
This product complies with the following EU directives:
2004/108/EC, 2006/95/EC, 1999/5/EC, and 2009/125/EC
This declaration is valid for the areas of the European Union (EU) or EFTA only.
● Special Notice to User-For Europe
The Facsimile has been approved in accordance with Council Decision 1999/5/EC for pan-European single terminal
connection to the public switched telephone network (PSTN). However, due to differences between the individual PSTNs
provided in different countries, the approval does not, of itself, give an unconditional assurance of successful operation on
every PSTN network terminal point.
In the event of problems, you should contact your equipment supplier in the first instance.
● Ozone Release
During print operation, a small quantity of ozone is released. This amount is not large enough to harm anyone adversely.
However, be sure the room where the machine is being used has adequate ventilation, especially if you are printing a high
volume of materials, or if the machine is being used continuously over a long period.
● Dégagement d’ozone
En cours de fonctionnement, l’imprimante ne dégage qu'une faible quantité d’ozone, insuffisante pour provoquer un
quelconque malaise personnel. Veillez cependant à ce que la pièce dans laquelle la machine est installée soit aérée de
manière adéquate, notamment si vous imprimez de gros volumes ou si l'imprimante est longtemps utilisée en continu.
● For EU member states only
This product complies with RoHS (2002/95/EC) directive.
● EU Directive 2002/96/EC and EN50419
This equipment is marked with the above recycling symbol. It means that all the end of the life of the equipment you must
dispose of it separately at an appropriate collection point and not place it in the normal domestic unsorted waste stream.
This will benefit the environment for all. (European Union only)
● EU Directive 2006/66/EC - Removing or Replacing the Battery
This product incorporates a battery that is designed to last for the lifetime of the product. It is not to be replaced by the user.
It should be removed as part of the machine recycling process at the end of life and appropriate precautions taken by the
recycler.
● International ENERGY STAR ® Compliance Statement
The purpose of the International ENERGY STAR ® Program is to promote the development and popularization of
energy-efficient office equipment.
As an ENERGY STAR ® Partner, KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. has determined that this product
meets the ENERGY STAR ® guidelines for energy efficiency.
(A32R-9560-00A)