Konica Minolta bizhub C353 - Manual (Page 92)

C353/C253/C203 8-10
Print functions of the PCL/PS drivers for Windows 8
2
Note
"Combination" provides options "2 Ч 2, 3 Ч 3, 4 Ч 4" to print a sheet of document into multiple sheets
of paper. The function is only for the PCL driver.
The "Skip Blank Pages" function is only for the PCL driver.
The positions of binding margins vary according to the "Binding Position" setting.
8.4.3 Finish tab
[Image Shift Set-
tings] Unit Selects the measurement unit that specifies the size.
Front Side/Back Side Specifies the shift direction and values. For 2-sided
printing, clearing the "Same Value for Front and Back
Sides" check box allows you to set different values
between the front and back sides.
Function name Option Description
Function name Option Description
Staple ON/OFF Specifies stapling.
From the drop-down list, specify the number of sta-
ples and the stapling position.
Center Staple and
Fold ON/OFF Specifies to saddle stitch a printed document.
Punch ON/OFF Specifies hole punching.
From the drop-down list, specify the number of
punches and the position.
Fold ON/OFF Specifies folding.
Center Erase ON/OFF When Center Staple and Fold is specified, select this
option not to print on the center fold line.
Output Tray Default, Tray1-3, Bin 1-6 Specifies the tray where to output the printed pages.
The selectable items differ depending on the options
that are installed.
Paper Arrangement Prioritize Arranging Papers, Priori-
tize Productivity Specifies the method for adjusting the binding posi-
tion for 2-sided print. The biding position is adjusted
after receiving all data for finishing priority. The data is
received and printed for productivity priority.