Konica Minolta Magicolor 2450 - Manual (Page 119)

Network Connection 103
3
If you don’t want to set the subnet mask or gateway, go to step 5.
If you don’t want to set the default rooter, but you do want to set the sub-
net mask, go to step 4.
If you want to set the default rooter, follow these steps.
IP ADDRESS
192.168.001.002
Use the and keys to move to each of the four number triplets.
Use the and keys to increase or decrease each number.
IP ADDRESS
xxx.xxx.xxx.xxx
Press this
key . . . (until) the message window displays . . .
DEFAULT ROOTER
192.168.001.001
DEFAULT ROOTER
192.168.001.001
Use the and keys to move to each of the four number triplets.
Use the and keys to increase or decrease each number.
DEFAULT ROOTER
xxx.xxx.xxx.xxx
Press this
key . . . (until) the message window reads . . .