Konica Minolta magicolor 4690MF - Manual (Page 283)

Configuring the Printer 267
TCP/IP
TCP/IP
The Network - TCP/IP - TCP/IP window allows you to configure the following
items. For more information on these TCP/IP settings, see chapter 6, “Net-
work Printing.”
Item Description
TCP/IP Select whether or not to make a connection via TCP/IP.
Choices:
Enable, Disable
Default: Enable
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - NET-
WORK SETTING - TCP/IP
Speed Select the transmission speed of the network.
Choices:
Auto, 10Base-T (Full), 10Base-T (Half),
100Base-TX (Full), 100Base-TX (Half)
Default: Auto
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT - NET-
WORK SETTING - SPEED/DUPLEX
LPD Select whether LPD is enabled or disabled.
Choices:
Enable, Disable
Default: Enable