Konica Minolta magicolor 4690MF - Manual (Page 297)

Configuring the Printer 281
The Network - IPP window allows you to configure the following items. For
details on IPP, refer to chapter 6, “Network Printing.” In order to apply the set-
tings, the printer must be turned off, then on again after the setting is speci-
fied.
Item Description
Enable IPP Selects whether or not IPP is used.
Choices: On, Off
Default: On
"
When “HTTP” is set to “Disable”, “Enable
IPP” will automatically be set to “Off” (the
“Enable IPP” check box will be cleared).
Configuration Menu Equivalent:
UTILITY - ADMIN. MANAGEMENT -
NETWORK SETTING - IPP
Printer Name Specifies the printer’s name.
Range:
Up to 127 characters
Default: KONICA MINOLTA magicolor
4690MF (xx:xx:xx)
"
“xx:xx:xx” refers to the last six digits of the
MAC address (in hexadecimal).
Printer Location Specifies the printer’s location.
Range:
Up to 127 characters
Default: [Blank]
Printer Information Specifies the printer information.
Range:
Up to 127 characters
Default: [Blank]
More Printer Information Specifies printer information that is more detailed
than the information entered in the “Printer Infor-
mation” box.
Range:
Up to 127 characters
Default: [Blank]
Printer Driver Installer Specifies the version information for the printer
driver installer.
Range:
Up to 127 characters
Default: [Blank]
Printer Make and Model Specifies the printer model information.
Range:
Up to 127 characters
Default: [Blank]