Konica Minolta bizhub PRO 950 - Manual (Page 6)

Introduction
bizhub PRO 950 Printer Driver 1-2
1.1 FCC Regulation
Thank you very much for purchasing the bizhub PRO 950.
This User's Guide describes the operating procedures and safety
precautions of the bizhub PRO 950 so that you can handle it safely and
make the best of its capabilities. Usually keep this User’s Guide close at
hand for the convenience of reference later.
FCC Regulation
Warning:
This equipment has been tested and found to comply with limits for a Class
A digital device, pursuant to part 15 of FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential area. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit other than the circuit to
which the receiver is connected.
• Consult your dealer or an experienced radio/TV technician for help.
1.2 Copyright
Copyright © 2004-2009 SOFHA GmbH, Germany.
Copyright © 2008-2009 KONICA MINOLTA BUSINESS TECHNOLOGIES,
INC.
Version 2.0, 11 Aug. 2009
KONICA MINOLTA, KONICA MINOLTA logo, and the essential of imaging
are registered trademarks of KONICA MINOLTA HOLDINGS, INC.
bizhub, bizhub PRO and PageScope are trademarks of KONICA MINOLTA
TECHNOLOGIES, INC.