Konica Minolta bizhub PRO 950 - Manual (Page 92)

Windows Printing
bizhub PRO 950 Printer Driver 6-28
Paper Type, Paper Weight, Paper Color, and Pre-Punched Paper
Determine requirements on the paper on which the job is printed. When
using one of them make sure that the printer contains the specified paper.
By pressing [Acquire Tray and Paper Data], the actual tray contents will be
displayed in the list (see above). If the job demands paper not contained in
the selected tray (e.g. when the job contains mixed paper sizes), the copier
will prompt you for inserting this paper.
The following paper types are supported:
• No setting, Plain Paper, Fine, Embossed, User, Blank Insert.
The following paper weights are supported:
• No setting, 40-49g/m
2
, 50-61 g/m
2
, 62-71 g/m
2
, 72-80 g/m
2
, 81-91
g/m
2
, 92-105 g/m
2
, 106-130 g/m
2
, 131-161 g/m
2
, 162-216 g/m
2
, 217-
244 g/m
2
, 245-300 g/m
2
.
Detail
Paper weight is displayed in [g/m²] by default. This can be changed in
the configure panel. See chapter 6.3.14 "Configure".
The following paper colors are supported:
• No setting, White, Clear, Yellow, Pink, Blue, Green.
Prepunched paper can be on or off.
When selecting special paper, please observe the following constraints:
• Paper weight 217-244 g/m
2
works only with the Bypass Tray and, if
available, the LCT. The paper weight 245-300g/m
2
works only with Tray
4. Note that Tray 4 is only available if the Paper Source Unit LU-407/408
is installed.
If Paper Name is specified, the printer will try to draw the specified paper
from the selected tray. If necessary, the printer will request the specified
paper.