Konica Minolta bizhub PRESS C1100 - Manual (Page 167)

Parameter Option Description
but the relationship between the colors does not
change.
● Use CMOCA settings—Select this method for
using CMOCA-defined rendering intent (triplet
X'95') instead of virtual printer defaults. If the
rendering intent is not defined by the CMOCA,
virtual printer default per CMYK is still used.
Emulate source paper
tint Emulates the original paper tint if the tint is included
in the profile.
Notes:
● If you select Emulate source paper tint, you
cannot select Preserve pure CMY colors.
● If the job is simplex, only the front side will be
printed using the tint emulation.
● If you select Emulate source paper tint,
Absolute is used as the rendering intent.
Black Point
Compensation Activates the Black Point Compensation algorithm,
which extends the gray axis of a profile and
increases detail in the darkest color areas.
RGB source profile Enables you to select an RGB source profile.
RGB rendering intent Provides the following options (for information on
each option, see the descriptions of the CMYK
rendering intent options in this table):
● Auto
● Relative
● Absolute
● Saturation
● Perceptual
● Use CMOCA settings
Apply CMYK emulation To convert RGB elements according to the selected
CMYK emulation method, select the Apply CMYK
emulation. The RGB elements receive the same
look as the CMYK elements, creating a unified
appearance.
Override CMOCA
settings Enables you to override CMOCA settings and
manually select a destination profile.
Working in IPDS mode 157