Konica Minolta bizhub PRESS C1100 User Manual
Page 53
Advertising
Using the Konica Minolta FD-5 spectrodensitometer to create a
calibration table
Requirements:
●
Your FD-5 spectrodensitometer must be connected to the USB
port on the IC-312 print controller. Turn on the device. If this is
the first time you are connecting the device to the IC-312 print
controller, the driver is automatically installed.
●
The Print queue must be ready for printing (not suspended),
and the printer must be warmed up.
Using the Konica Minolta FD-5 spectrodensitometer to create a calibration table
43
Advertising
This manual is related to the following products: