Konica Minolta 8050 - Manual (Page 21)

4 Installing the Printer Driver
4-2 IP-418
4.1 Installing the Printer Driver Using Plug and Play
Installation using Plug and Play is not possible on Windows 95 and
NT 4.0. Refer to the procedure for using the Add Printer Wizard.
Installing the Printer Driver Using Plug and Play Under Windows XP
1 With Windows running, insert the CD-ROM into your computer’s CD-
ROM drive.
2 Turn on the machine.
3 When the machine is ready, connect it to the computer with the USB
cable.
The “Found New Hardware Wizard” dialog box appears.
4 Select Install from a list or specific location [Advanced] , and then
click [Next].
5 Select Include this location in the search: under Search for the
best driver in these locations. , and then click [Browse].
6 Browse to “Driver\(language)\2k_XP” on the CD-ROM, and then click
[OK].
✎
Tip
Select the language you prefer. For example, if you prefer English,
browse to:
Driver\English\2k_XP
7 Click [Next].
8 The “Completing Found New Hardware Wizard” dialog box appears.
❍ Click [Finish].
9 The “Found New Hardware Wizard” dialog box appears again.
❍ Repeat steps 4 through 7.
✎
Note
This completes the installation of the printer driver.
3S4SC_PCL_QGE.book Page 2 Wednesday, September 15, 2004 9:54 AM