Konica Minolta 8050 - Manual (Page 32)

Troubleshooting 7
IP-418 7-3
7.2 Main Messages
The table below describes the main error messages that may appear
during the PC print mode operations.
Error Message Cause Action
PAPER SIZE
ERROR The paper size
specified for a paper
tray differs from the size
of paper that is loaded. Load paper of the
correct size into the
tray.
NO SUITABLE
PAPER “Auto” is selected for
Paper Source with the
printer driver properties,
but none of the
machine’s trays contain
paper of the size
specified for printing. Tray 1:
Change the paper size
in the Utility mode, and
load the correct paper
into the tray.
Tray 2-Tray 5 (option):
Use a paper feed
cassette loaded with
paper of the
corresponding size.
Bypass Tray:
Change the paper that
is loaded.
(NO SUITABLE
PAPER)
Press the [Start] key to
begin printing with the
paper source or paper
size specified in Utility
mode.
(INCORRECT PAPER
SIZE)
Press the [Start] key to
begin printing with the
paper size loaded in the
tray selected from the
printer driver. (Tray 1
and Tray 2-Tray 5)
INCORRECT
PAPER SIZE The paper size
specified by the printer
driver is not loaded in
the specified paper tray.
PAPER EMPTY There is no paper in the
specified tray or the
specified tray is not
loaded in the machine. Load paper into the tray
or load tray in the
machine.
3S4SC_PCL_QGE.book Page 3 Wednesday, September 15, 2004 9:54 AM