Konica Minolta bizhub PRO C500 - Manual (Page 21)

Print an InDesign File From a Macintosh Computer
IC-301 Print Controller for the bishub PRO C500 Printer 15
15. Drag the file IC-301V1.PPD to the folder en.Iproj .
Step 2: Adding a Printer to Your Macintosh Computer
After you copied the PPD to the Macintosh, you are ready to add the IC-301 print
controller as a network printer on your Macintosh computer.
To add a network printer on your Macintosh:
1. From the Go menu, select Applications .
2. Open the folder Utilities .
3. Double-click Printer Setup Utility .
4. Click Add .
5. In the upper box, select AppleTalk .
6. In the lower box, select AppleTalk Network .
7. Assuming you have AppleTalk zones in your network, double-click the required
AppleTalk Zone in the list (as instructed by your system administrator).
8. Find the IC-301 print controller name (as instructed by your system
administrator) in the list.
9. In the list, select <server_name>_Print .
Any jobs sent to this printer will be automatically RIPed, printed, and stored.
Note: You may need administrator privileges to be able to copy the PPD to the system folder.
Important: Before you add the network printer, check with your system administrator what is
the name of the IC-301 print controller and where it is located in the network (AppleTalk zone).
Note: This activity is based on the Macintosh OS 10.3.