Konica Minolta bizhub 750 - Manual (Page 297)

4 Specifying Settings Using PageScope Web Connection
4-30 bizhub 750/600
Spe
c
if
ying
Set
ti
ng
s Usin
g Pag
e
Scope
We
b Co
nne
ctio
n
Chapter 4
File Name Enter the file name (up to 30 characters).
Original Direction Select the orientation of the original document.
Bind Select the original binding position.
Special Original Select whether the document contains mixed page sizes or is
Z-folded.
Book Scanning Select whether or not to enable book scanning. If “ON” is
selected, the scanning method and binding position are
specified.
Booklet Pagination Select whether or not to enable page scanning. If “ON” is
selected, the binding position is specified.
Erase Specify the width of the perimeter of the document to be
erased.
Center Erase Specify the width of the area along the binding that is to be
erased.
Full Image Area Select whether or not the image is scanned reduced to the
minimum zoom ratio, then centered within the paper so that
no part of the image is cut off.
Neg-/Positive Reverse Select whether or not the black and white areas of the
document are reversed in the scan.
Non-Image Area Erase Select whether or not the shadows along the edges of a
document are erased from the scan.
Item Description