Konica Minolta bizhub 750 - Manual (Page 38)

Scanning Documents 2
bizhub 750/600 2-3
Scan
nin
g
Do
cu
men
ts
Chapter 2
7 [Copy] key Press to enter Copy mode. (As a default, the
machine is in Copy mode.) While the machine is in
Copy mode, the indicator on the [Copy] key lights
up in green.
For details, refer to the User’s Guide [Copy Opera-
tions].
8 [Reset] key Press to clear all settings (except programmed
settings) entered in the control panel and touch
panel.
9 [Interrupt] key Press to enter Interrupt mode. While the machine is
in Interrupt mode, the indicator on the [Interrupt]
key lights up in green and the message “Now in
Interrupt mode.” appears on the touch panel. To
cancel Interrupt mode, press the [Interrupt] key
again.
10 [Stop] key Press the [Stop] key during scanning to stop the
scan operation.
11 [Start] key Press to start scanning. When this machine is ready
to begin scanning, the indicator on the [Start] key
lights up in green. If the indicator on the [Start] key
lights up in orange, scanning cannot begin.
Press to restart a stopped job.
12 Main Power indicator Lights up in green when the machine is turned on
with the auxiliary power button.
13 Data indicator Flashes in green while a print job is being received.
Lights up in green when data is being printed.
14 [Proof Copy] key This key is not used in scanner mode.
15 Keypad Use to type in various values.
16 [C] (clear) key Press to erase a value (such as the number of a
zoom ratio, or a size) entered using the keypad.
17 [Mode Check] key Press to display screens showing the specified
settings.
18 [Utility/Counter] key Press to display the Utility screen and Meter Count
screen.
19 [Mode Memory] key This key is not used in scanner mode.
20 Contrast dial Use to adjust the contrast of the touch panel.
21 [Enlarge Display] key Press to enter Enlarge Display mode.
22 [Accessibility] key Press to display the screen for specifying user
accessibility functions.
23 [Help] key Press to display the Help Main Menu screen, where
descriptions of the various functions and details of
operations can be displayed.
No. Part Name Description