24 time adjustment settings, Time adjustment parameters, To specify time adjustment settings – Konica Minolta bizhub 750 User Manual

Page 222: Time adjustment settings -101

Advertising
background image

Specifying Settings From the Control Panel

3

bizhub 750/600

3-101

Sp

ec

ifyin

g

Set

tin

gs

F

ro

m

th

e

Co

nt

ro

l Pa

ne

l

Chapter 3

3.24

Time Adjustment Settings

The machine’s internal clock can be corrected via the network.

Time Adjustment Parameters

The time adjustment parameters are as follows:

After specifying this setting, touch [1 System Setting] in the Administrator
Setting, touch [3 Date/Time Setting], and then set the date.

Periodic automatic adjustment is not performed.

To specify time adjustment settings

1

In the Administrator Setting screen, touch [5 Network Setting]. (Refer to
page 3-8 for more details.)

2

In the Network Setting screen, touch [0 Detail Setting].

3

In the Detail Setting screen, touch [2 Time Adjustment Setting].

The Time Adjustment Setting screen appears.

4

Specify the desired settings.

5

Touch [OK].

The device information is set.

Item

Description

NTP Setting

Specify whether to turn on the NTP.

NTP Server Address

Sets the IP address of the NTP server. For details on spec-
ifying the settings, refer to “NTP Server Address” on
page 3-102.

Port No.

Set the port number used to communicate with the NTP
server. To change the value, press the [C] (clear) key, and
then use the keypad to type in the value (between 1 and
65535).

Advertising
This manual is related to the following products: