Port no, Port no -134 – Konica Minolta bizhub 750 User Manual

Page 255

Advertising
background image

3

Specifying Settings From the Control Panel

3-134

bizhub 750/600

Sp

ec

ifyin

g

Set

tin

gs

F

ro

m

th

e

Co

nt

ro

l Pa

ne

l

Chapter 3

Port No.

Specify the port number that other systems access using OpenAPI (initial
port number: 50001, initial port number (SSL): 50003).

1

In the Administrator Setting screen, touch [9 System Connection]. (Re-
fer to page 3-8 for more details.)

2

In the System Connection screen, touch [1 OpenAPI Setting].

3

In the OpenAPI Setting screen, touch [Port No.].

The OpenAPI Port Setting screen appears.

4

Press the [C] (clear) key to erase the value, and then use the keypad to
type in the value (between 1 and 65535).

If a value outside of the allowable range is specified, the message
“Input Error” appears. Type in a value within the allowable range.

5

Touch [OK].

To cancel changes to the setting, touch [Cancel].

The port number that other systems access using OpenAPI is set.

2

Note

If the port number for SSL communication is specified, the certificate
must be pre-installed from PageScope Web Connection. For details, re-
fer to “SSL/TLS” on page 4-89.

Advertising
This manual is related to the following products: