Konica Minolta bizhub C3850 User Manual
Page 27
Advertising
[Maintenance/Troubleshooting]
2-15
2.2
Replacing consumables
2
5
Insert the shaft of the Transfer Roller into the bearing in the machine.
6
Press down two tabs at the right and left of the Transfer Roller to lock it.
7
While holding down the roller, press it inward until it clicks.
8
Close the Right Door.
9
Select [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Life] - [New Release]
- [Transfer Roller Unit], then reset the counter.
Advertising
This manual is related to the following products: