6 replacing a toner filter, Replacing a toner filter -22 – Konica Minolta bizhub C3850 User Manual
Page 34
Advertising
[Maintenance/Troubleshooting]
2-22
2.2
Replacing consumables
2
2.2.6
Replacing a Toner Filter
0
The Toner Filter is in the Transfer Belt package.
1
Pull the filter case out from the main unit.
2
Push the Toner Filter from the bottom up, then take it out of the case.
3
Take a new Toner Filter out of the plastic bag.
% Put the used Toner Filter in the plastic bag that contained the new Toner Filter was contained.
4
Insert a new Toner Filter into the case.
Advertising
This manual is related to the following products: