8 replacing a staple kit, Replacing a staple kit -27 – Konica Minolta bizhub C3850 User Manual
Page 39
Advertising
[Maintenance/Troubleshooting]
2-27
2.2
Replacing consumables
2
13
Close the Fusing Cover.
14
Close the Right Door.
% If the Right Door is not closed, check that the Fusing Unit is installed correctly.
15
Select [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Life] - [New Release]
- [Fusing Unit], then reset the counter.
2.2.8
Replacing a Staple Kit
1
Rotate the Finisher 90 degrees.
Advertising
This manual is related to the following products: