Konica Minolta magicolor 4690MF - Manual (Page 255)

Status, Error, and Service Messages 243
Error Messages
"
For details on fax error messages, refer to the Facsimile User’s Guide
on the Documentation CD/DVD.
This message... means... Do this...
ADDRESS IS TOO LONG
The e-mail address
retrieved from the
LDAP server
exceeds 64 charac-
ters. This machine can han-
dle addresses contain-
ing no more than 64
bytes. Use a shorter
address.
CANNOT CONNECT
xxx Server
While the scanned
document was
being sent in Scan
mode, a connection
with the specified
server could not be
established. Check the settings
specified in the NET-
WORK SETTING and
E-MAIL SETTING
menus, and then try
sending the data
again.
CANNOT GET IP
xxx Server
The IP address of
the SMTP server
could not be
obtained from the
DNS server. Check the settings
specified in the NET-
WORK SETTING and
E-MAIL SETTING
menus, and then try
sending the data
again.
COMMUNICATION ERROR
PC CONNECTION FAILED
While data was
being sent in Scan
mode, the connec-
tion to the computer
was interrupted. Check the connection
with the computer and
the scanner driver sta-
tus, and then try send-
ing the data again.
COMMUNICATION ERROR
USB Memory
While data was
being sent in Scan
mode, the connec-
tion to the USB
memory device was
interrupted. Check the connection
to the USB memory
device, and then try
sending the fax again.
COMMUNICATION ERROR
xxx Server
While data was
being sent in Scan
mode, the connec-
tion to the server
was interrupted. Check the settings
specified in the NET-
WORK SETTING and
E-MAIL SETTING
menus, and then try
sending the data
again.