Konica Minolta BIZHUB C360 - Manual (Page 214)

bizhub C360/C280/C220 8-8
8.2 User mode settings 8
Relay User Box
You can create up to five Relay User Boxes. The creation and editing setting items are as follows.
Reference
- To change the setting of a created User Box, select the target User Box and press [Edit].
- If [Edit] is selected, you cannot change the User Box number.
- To delete a created User Box, select the target User Box and press [Delete].
d
Reference
For details on how to register the header or footer, refer to the [User's Guide Network Scan/Fax/Network Fax
Operations].
Item Description
[User Box No.] Automatically displays an unassigned number. To specify a User Box
number, press [User Box No.], and use the keypad to enter the User Box
number between 1 and 999999999.
[User Box Name] Press [User Box Name], and enter the User Box name in the control panel
(up to 20 characters). Specifying different User Box numbers enables you
to create User Boxes with the same name.
[Relay Destination] Select a relay destination to send data from the Relay User Box. Pre-reg-
ister the relay destination as a group destination.
•
When registering a group destination as a relay destination, be sure to
set Abbreviation Dial in the group destination in advance.
[Relay TX Password] Specify a password to limit access to the User Box. Press [Relay TX Pass-
word], and enter the password in the control panel (up to 8 characters).