Konica Minolta BIZHUB C360 - Manual (Page 199)

bizhub C360/C280/C220 7-94
7.17 External Memory (System User Box) 7
7.17 External Memory (System User Box)
7.17.1 External memory device
Supported external memory devices
Requirements for external memory devices of this machine are as follows.
- USB flash memory device that supports the USB (1.1/2.0) interface
- FAT32-formatted memory device
Connecting the external memory device
0 Use the USB connector on the side that is near the control panel. Do not use the USB connector near
the rear side because it is used for optional devices.
0 Do not disconnect the external memory device while saving a document in the external memory device
or printing a document saved in the external memory device.
0 Do not use the USB device (hard disk or USB hub) other than the USB flash memory device.
0 Do not connect or disconnect the USB memory when the hourglass is being displayed in the control
panel while this machine is active.
0 Do not disconnect the USB memory just after connecting it.
%
Connect the external memory device to the USB connector on the side of this machine.
When the external memory device is connected, an icon appears at the bottom of the screen and the
following screen is displayed. If you will immediately use the external memory, select the intended pur-
pose. When not using the exert memory, select [Close].
Reference
- The intended purpose of the external memory to be displayed varies depending on the administrator
settings.