Konica Minolta bizhub PRESS C1070 - Manual (Page 64)

5-6
5.1 Both Sides Adjustment
K
Check a gap of the printing position refering the printed out chart.
Repeat steps 8 to 12 until all gaps between the front and back sides are cleared.
L
Press [Exit Print Mode].
M
After the adjustment is completed, press
[OK].
To finely adjust the adjustment value,
continuously proceed to step 4 in "Zoom and
Image Shift Adjustment" (page 5-14).
N
Press [Close] to exit the adjustment.
Gap adjustment is then completed.
- To register adjustment values in a paper
profile, press [Register].
- For details about how to register a paper
profile, refer to the HTML User's Guide.