Konica Minolta bizhub 40P - Manual (Page 125)

Replacing Consumables 115
Note
Do not use refilled toner cartridges or unapproved toner cartridges. Any
damage to the printer or quality problems caused by a refilled toner
cartridge or an unapproved toner cartridge will void your warranty. No
technical support is provided to recover from these problems.
When replacing a toner cartridge, refer to the following table. For optimum
print quality and performance, use only approved KONICA MINOLTA toner
cartridge for your specific printer type, as listed in the table below. You can
find your printer type and the toner cartridge part numbers on the consum-
ables reorder label inside the front cover your printer.
"
For optimum print quality and performance, use only the corre-
sponded TYPE genuine KONICA MINOLTA toner cartridge.
Keep toner cartridges:
„ In their packaging until you’re ready to install them.
„ In a cool, dry location away from sunlight (due to heat).
The maximum storage temperature is 35°C (95°F) and the maximum
storage humidity is 85% (noncondensing). If the toner cartridge is moved
from a cold place to a warm, humid place, condensation may occur,
degrading print quality. Allow the toner to adapt to the environment for
about one hour before use.
„ Level during handling and storage.
Do not hold, stand or store a cartridge on its ends or turn it upside down;
the toner inside the cartridge may become caked or unequally distributed.
„ Away from salty air and corrosive gases such as aerosols.
Printer
Type Printer Parts
Number Toner Cartridge Type Toner Cartridge
Parts Number
AM A0DX 013 High-Capacity Toner Cartridge - Black (K) A0FP 013
EU A0DX 023 High-Capacity Toner Cartridge - Black (K) A0FP 023