Konica Minolta bizhub 40P - Manual (Page 182)

Solving Other Problems 172
Printing from
a USB mem-
ory device is
not possible. The file format (file
extension) is not one
that can be printed. Only files with the format (extension)
for
JPEG , TIFF , XPS , or PDF are sup-
ported.
MEMORY DIRECT
for the printer is set to
DISABLE .
Change the setting for INTERFACE
MENU/MEMORY DIRECT to
ENABLE .
A public user is not
specified for user
authentication. Contact the printer administrator.
Printing
takes too
much time. The printer is set to a
slow printing mode
(for example, thick
stock or transpar-
ency). It takes more time to print on special
media. When using regular paper,
make sure that the media type is set
properly in the driver.
The printer is set to
Energy Saver mode. It takes time for printing to start in
Energy Saver mode. If you do not want
to use this mode, disable it. (
SYS
DEFAULT MENU/ENERGY SAVER
menu)
The job is very com-
plex. Wait. No action needed.
The printer memory is
insufficient. Add more memory.
A toner cartridge for a
different region or an
unapproved genuine
toner cartridge is
installed. Install a correct KONICA MINOLTA
toner cartridge approved for your spe-
cific printer.
Blank pages
come out
during print-
ing. The toner cartridge
may be defective or
empty. Check the toner cartridge. The image
will not print if it is empty.
The wrong media is
being used. Check that the media type set in the
driver matches the media loaded in the
printer.
Symptom Cause Solution