Printing flow, Printing flow -3 – Konica Minolta bizhub C250 User Manual
When using this printing system as a printer, the flow of the main process is
Print commands transmitted from the application are received by the printer
Data is transmitted to this machine over a parallel interface (IEEE 1284) when
this machine is used as a local printer, over a USB interface when this ma-
chine is used as a USB printer, or over an Ethernet interface (TCP/IP, IPX/
SPX or AppleTalk) when this machine is used as a network printer. The data
is then delivered from this machine to the printer controller, which performs
image rasterization (development of output characters and images to bitmap
data). Finally, this data is printed from this machine.
The parallel and USB interfaces cannot be used simultaneously.
Original documents can be scanned in the copy function or network scan
function while this machine is operating as a printer.
To use this machine as a copier, press the [Copy] key on the control panel.
Used as a local
Used as a USB
Used as a
Ethernet (TCP/IP, IPX/
SPX, or AppleTalk)
PS/PCL processing (rasterizing)