Konica Minolta bizhub C250 - Manual (Page 80)

Various Settings 5
C250 5-5
Printing
To print
1
Press the [Utility/Counter] key in the control panel.
2
Touch [6 Banner Printing].
3
Touch [ON], and then touch [OK].
4
Follow the instructions in the screen to reposition the finisher.
– On the finisher, load the banner paper that can be used on the pa-
per transport.
– If the finisher is not installed, or if the screen shown below does not
appear, continue with step 5.
5
Select a job to be printed from the computer, and then click “Print” on
the “File” menu.
6
Specify the desired settings, and then click the [OK] button.
7
Open the bypass tray.