Konica Minolta bizhub C35 - Manual (Page 232)

Network Connection 7-5
4
If you don’t set the gateway, go to step 5.
Specify the gateway address for this machine.
„ Specify the gateway address by pressing the buttons indicated below.
[Utility Settings] – [Admin Settings] – [Ethernet] – [TCP/IP] – [Gateway]
„ Change the setting, and then press [OK].
5
After specifying administrator settings, reset the printer so that it can print.
6
After "Welcome!" appears in the control panel of the machine, print the
configuration page, and then check the IP address, subnet mask and
gateway address that has been specified.
„ Print the configuration page by pressing the buttons indicated below. [Util-
ity Settings] – [User Settings] – [Print Settings] – [Print Reports] – [Config-
uration Page]
7
Install the printer driver and utilities.