Konica Minolta bizhub C35 - Manual (Page 357)

Configuring the Printer 8-90
[Access Refuse Address] To specify addresses being denied
access, select [Enable].
Choices: [Enable], [Disable]
Default: [Disable]
Range of IP
address
refused access Specify the starting and ending
addresses of ranges being denied
access.
Format: *.*.*.* (The asterisks (*) indicate
numbers between 0 and 255.)
Default: [0.0.0.0]
"
To specify a single IP address, type
the same IP address into both the
box for the starting IP address and
for the ending IP address, or type
"0.0.0.0" into the box for either the
starting IP address or the ending IP
address.
"
If the starting IP address is larger
than the ending IP address, the
setting is not applied.
Item Description