Konica Minolta magicolor 8650 - Manual (Page 36)

8650 2-21
Administrator Operations 2
5
Press the [Menu/Select] key.
? What if an Administrator Password different from that is currently registered is mistakenly entered?
% If there is a mismatch between the currently registered Administrator Password and the
Administrator Password entered, a message appears that tells that there is a mismatch in the
Administrator Passwords. Enter the correct Administrator Password.
% If the EnhancedSecurity is set to [ON], entry of a wrong password is counted as unauthorized
access. If a wrong Administrator Password is entered a predetermined number of times (once to
three times) set by the Administrator of the machine, the Utility screen appears and the machine is
set into an access lock state. To cancel the access lock state, settings must be made by the Service
Engineer; or, turn off, and then turn on, the main power switch of the machine. If the main power
switch is turned off and on, the access lock state is canceled after the lapse of time set for [Release
Time Settings]. When the main power switch is turned off, then on again, wait at least 10 seconds
to turn it on after turning it off. If there is no wait period between turning the main power switch off,
then on again, the machine may not function properly.
6
Press the [+] and/or [,] key to enter the new 8-digit Administrator Password.
– Press the [*] key to delete the last character entered.
7
Press the [Menu/Select] key.
? What happens if the Administrator Password entered does not meet the requirements of Password
Rules?
% The Administrator Password entered will be cleared if it does not meet the requirements of the
Password Rules. Enter the correct Administrator Password. For details of Password Rules, see
"Password Rules" on page 1-8 .
8
To prevent entry of a wrong Administrator Password, press the [+] and/or [,] key to enter the new 8-
digit Administrator Password once again.
– Press the [*] key to delete the last character entered.
9
Press the [Menu/Select] key.
? What happens if there is a mismatch in the Administrator Passwords?
% If there is a mismatch in the Administrator Passwords, the Administrator Password entered the
second time is cleared. Perform steps 8 and 9 once again to enter the correct Administrator
Password.