Konica Minolta magicolor 8650 - Manual (Page 84)

8650 4-3
Application Software 4
4
Type the 8-digit Administrator Password registered in the machine and click [OK].
– If the "Save" check box is selected, enter the 8-digit Administrator Password once again to make
sure that the Administrator Password has been entered correctly.
? What happens if a wrong Administrator Password is entered?
% If a wrong Administrator Password is entered, a message appears saying that there is a mismatch
in the passwords and entry of the Administrator Password will be prohibited for five sec. Wait for
some while before entering the correct Administrator Password.
% If a wrong Administrator Password is entered for confirmation, a message appears that tells that
there is a mismatch in the Administrator Password. Enter the correct Administrator Password.
% If the EnhancedSecurity is set to [ON], entry of a wrong password is counted as unauthorized ac-
cess. If a wrong Administrator Password is entered a predetermined number of times (once to three
times) set by the Administrator of the machine or more, a message appears saying that the machine
accepts no more Administrator Passwords because of unauthorized access for any subsequent en-
try of the Administrator Password. The machine is then set into an access lock state. To cancel the
access lock state, settings must be made by the Service Engineer; or, turn off, and then turn on, the
main power switch of the machine. If the main power switch is turned off and on, the access lock
state is canceled after the lapse of time set for [Release Time]. When the main power switch is
turned off, then on again, wait at least 10 seconds to turn it on after turning it off. If there is no wait
period between turning the main power switch off, then on again, the machine may not function
properly.
5
Check the data displayed on the SSL certificate check screen and click [Yes].
2
Reminder
If the "Save" check box has been selected, the Administrator Password entered is stored in the PC be-
ing used. If you do not want the Administrator Password stored, clear the "Save" check box.