Konica Minolta magicolor 8650 - Manual (Page 25)

8650 2-10
Administrator Operations 2
2.3 HDD Installation
When access by the Administrator of the machine through the Admin. Settings via the control panel is
authenticated, the machine enables setting of HDD Installation. The following types of data are cleared when
the setting for HDD Installation is changed from [Installed] to [Not Installed]. If the HDD Installation is later
changed back from [Not Installed] to [Installed], be sure again to make the settings for the types of data that
have been cleared.
2
Note
When the setting for HDD Installation is changed from [Installed] to [Not Installed], EnhancedSecurity is
set to [OFF]. When the HDD Installation is later changed back from [Not Installed] to [Installed], be sure
again to set EnhancedSecurity to [ON]. For details of the EnhancedSecurity, see
"Setting the
EnhancedSecurity" on page 2-8 .
!
Detail
When the setting for HDD Installation is first set to [Not Installed] and later changed back to [Installed]
and if the original hard disk is reused, the image data and Security Print Document contained in the
respective boxes become usable. Note, however, that all Personal User Boxes and Group User Boxes
become Public User Boxes. If the password set for a particular box before this change does not meet
the requirements of Password Rules, however, no access can be made to the Public User Box, to which
that specific box was changed. In this case, the Administrator must first newly set a password that
meets the requirements of the Password Rules. For details of Password Rules, see
"Password Rules"
on page 1-8 .
2.3.1 Setting HDD Installation
2
Note
Do not leave the machine with the setting screen of Admin. Settings left shown on the display. If it is
absolutely necessary to leave the machine, be sure first to log off from the Admin. Settings.
<Setting can be made only from the control panel>
0 For the procedure to call the Admin. Settings to the display, see "Accessing the Admin. Settings" on
page 2-2 .
1
Call the Admin. Settings to the screen from the control panel.
2
Press the [,] key to select [Option Settings].
3
Press the [Menu/Select] or [)] key.
Types of Data Cleared Description
EnhancedSecurity Set to [OFF]
User Box Function Disabled