2 changing the user box attributes, Changing the – Konica Minolta magicolor 8650 User Manual

Page 76

Advertising
background image

8650

3-7

User Operations

3

3.2.2

Changing the User Box attributes

<Setting can be made only from PageScope Web Connection>

0

For the procedure to call the PageScope Web Connection to the display, see steps 1 through 3 of

"Setting the User Box" on page 3-5

.

1

Start the PageScope Web Connection.

2

Click the [Box] tab and the [Open User Box] menu.

3

Enter the User Box Number and User Box Password of the target User Box and click [OK].

?

What if there is a mismatch between the User Box Number and User Box Password?

%

If there is a mismatch between the User Box Number and User Box Password, a message appears
that tells that authentication has not been successful. Click [OK] and perform step 3 once again.

%

If the EnhancedSecurity is set to [ON], entry of a wrong User Box Password is counted as unautho-
rized access. If a wrong User Box Password is entered a predetermined number of times (once to
three times) set by the Administrator of the machine, a message appears that tells that authentica-
tion has not been successful for any subsequent operation for authentication. The machine is then
set into an access lock state. To cancel the access lock state, the Administrator of the machine must
perform the Release Setting. Contact the Administrator of the machine.

Advertising