Konica Minolta MS7000 MKII - Manual (Page 32)

3
The Driver Software Installation (64bit driver)
3-6 MS6000 MKII/MS7000 MKII
Windows Vista (64bit)
Important! For the Windows Vista 64bit, be sure to reboot the computer when
you connect the scanner to the computer and perform the installation
of the driver at the beginning.
If you don’t reboot the computer, the driver can’t be booted because it
can’t recognize the scanner.
1.
Turn on the scanner.
2. Use the USB cable to connect the scanner to the computer.
3. When the Found New Hardware Wizard appears, click Locate and install driver
software (recommended).
If the User Account Control dialog box appears, click Continue.
4. When the Windows Security dialog box appears, click Install this driver
software anyway.