Konica Minolta MS7000 MKII - Manual (Page 33)

The Driver Software Installation (64bit driver)
3
MS6000 MKII/MS7000 MKII 3-7
5. When
KONICA MINOLTA MS6000 MKII Microfilm Scanner or KONICA
MINOLTA MS7000 MKII Microfilm Scanner is displayed, be sure to power off the
scanner and reboot the computer.
Note If you click the above balloon, following screen appears.
The update of Windows will be performed during the rebooting of the
computer, so be sure not to power off the computer during the update of
Windows.
6. Reboot the computer, then power on the scanner again.
7. Then Installing device driver software appears again.
8. When KONICA MINOLTA MS6000 MKII Microfilm Scanner or KONICA
MINOLTA MS7000 MKII Microfilm Scanner is displayed, the driver was installed
successfully.