Konica Minolta MS7000 MKII - Manual (Page 31)

The Driver Software Installation (64bit driver)
3
MS6000 MKII/MS7000 MKII 3-5
Connecting to a PC
Note When connecting the scanner to the computer, use the USB cable included
with the interface kit.
Windows 7 (64bit)
1. Turn on the scanner.
2. Use the USB cable to connect the scanner to the computer.
3. Installing device driver software appears.
4. When KONICA MINOLTA MS6000 MKII Microfilm Scanner or KONICA
MINOLTA MS7000 MKII Microfilm Scanner is displayed, the driver was installed
successfully.