Batch scan mode, The action buttons, Scan – Konica Minolta MS7000 MKII User Manual
Page 59: Focus, Scan -11, Focus -11, 8 batch scan mode, 9 the action buttons
The MS7000 MKII TWAIN Driver User’s Guide
5
MS6000 MKII/MS7000 MKII
5-11
5-8 Batch Scan Mode
When utilized the application can continue to initiate scans upon completion of the initial
scan.
When selected the Batch Scan Mode will cause the driver to remain open and will place
a Done button in the Status Window. While the Status Window is displayed you can
continue to initiate scans and make setting changes from the front panel of the scanner.
When the Done button is pressed, the Status Window and Driver UI will close and all
image data will be displayed in the scanning application.
Note
If Batch Scan Mode is used, the 2nd and all subsequent scans are executed
with the scanner.
5-9 The
Action
Buttons
Scan
The scanning begins. It becomes Scan Stop button while scanning.
Note
While scanning, do not change the panel settings of the scanner or the
driver settings.
Focus
The focus is adjusted automatically.
Note
Do not perform any other operation while using focus.