Konica Minolta MS7000 MKII - Manual (Page 68)

6
Special Function
6-8 MS6000 MKII/MS7000 MKII
6-6 The Action Buttons
MARS Controller
When the MARS controller is connected, the MARS Controller screen is displayed under
the Scan Setting screen.
ACF Controller (When ACF-7 is connected)
When the ACF-7 is connected, the ACF Controller screen is displayed under the Scan
Setting screen.
6-7 MARS Controller
It is a function of the PC to control the Mars controller. This function cannot be utilized
when not connected with the Mars controller.
.
Note The MARS CONTROLLER 4 firmware must be version 4.5 or 5.5 or higher.
The MARS MINI CONTROLLER 2 firmware must be version 1.6 or
26G100-00 or higher.
¾ Single Level Retrieval, Dual Level Retrieval - Select the type of film retrieval with
Single Level Retrieval or Dual Level Retrieval.
Note The MARS mode selection should be matched to the type of film being
used.