Acf controller (when acf-7 is connected), Auto feed / scan, Auto feed – Konica Minolta MS7000 MKII User Manual
Page 70: Auto feed / scan -10, Auto feed -10, 8 acf controller (when acf-7 is connected)
6
Special
Function
6-10
MS6000 MKII/MS7000 MKII
6-8 ACF Controller (When ACF-7 is connected)
It is a function of the PC to control the ACF-7. This function cannot be performed when
not connected with ACF-7.
Note
The ACF-7 firmware must be version 50G107-00 or higher.
Auto Feed / Scan
¾
Number of Cards, All Cards - Specify the number of cards to be used continuously
scanned.
¾
Auto Feed / Scan - Starts the continuous scanning. While in continuous scanning, it
becomes “Scan Stop” button. When the button is pressed, continuous scanning is
stopped.
Auto Feed
¾
Number of Cards, All Cards - Specify the number of cards which performs
continuous card feeding.
¾
Auto Feed - Start the continuous card feeding. While in continuously card feeding, it
becomes “Feed Stop” button. When the button is pressed, continuous card feeding is
stopped.
¾
Feed Interval - Specify the interval of the card feeding.