Konica Minolta MS7000 MKII - Manual (Page 8)

1
Getting Ready
1-2 MS6000 MKII/MS7000 MKII
1-2 System Requirements
The following operating environment is required in order to use the Scanner driver.
Computer Compatible with IBM PC/AT
Operating System
(32bit driver) Windows 7 (32bit)
Windows Vista (32bit) SP2 or later
Windows XP Professional / Home Edition SP3 or later
Windows 2000 Professional SP4 or later
Operating System
(64bit driver) Windows 7 (64bit)
Windows Vista (64bit) SP2 or later
Windows XP Professional x64 Edition SP2 or later
Required
CPU/memory Required CPU: Pentium III 500MHz or higher
Required memory: 256MB or more
Interface Hi-Speed USB
CD-ROM drive
Application
software Application software compatible with TWAIN32
(32-bit application compatible with Windows 7/Vista/XP/2000)
Note The optional interface kit is required to connect MS6000 MKII/MS7000 MKII
to the computer.
The MS6000 MKII/MS7000 MKII firmware must be version 25G102-00 or
higher. (32bit driver)
The MS6000 MKII/MS7000 MKII firmware must be version 25G110-00 or
higher. (Both 32bit driver and 64bit driver can be used.)
In addition, the Scanner Driver must be Ver.2.26 (32bit), Ver.3.16 (64bit) or
later.
If a USB hub is connected, the system may not operate correctly. Use the
USB cable included with the interface kit to connect the scanner directly to
the USB port of the computer.