The driver software installation (32bit driver), 2 the driver software installation (32bit driver) – Konica Minolta MS7000 MKII User Manual
Page 9
The Driver Software Installation (32bit driver)
2
MS6000 MKII/MS7000 MKII
2-1
2 The Driver Software Installation (32bit driver)
This chapter details the procedures for installing the driver software and for connecting
the scanner to the computer.
Important!
Do not connect the scanner to a computer before installing the driver
software.
If you connect the scanner and the Found New Hardware Wizard
appears, unplug the USB cable from the computer, and then click
Cancel to close the screen.
Note
The Driver Version 2.26 will automatically uninstall the incompatible
previous USB Driver software, such as Ver.6.0.1.7 or before, during the
installation process. Or you may need to uninstall the incompatible driver
software manually prior to installing the version 2.26 driver software.
Before installing the new Version 2.26 driver, delete the SCSI driver
software.
The MS6000MKII/MS7000MKII firmware must be version 25G102 or higher.