Konica Minolta FK-502 - Manual (Page 129)

5 Troubleshooting
5-2 bizhub 750/600
T
rou
ble
s
h
oot
in
g
Chap
te
r 5
5 Troubleshooting
5.1 Cannot Send Messages
When a document cannot be sent, try to correct the problem by referring to
the table below. If the document still cannot be sent properly even after
attempting to correct the problem, please contact your service
representative.
!
Detail
Refer to "Error Message Displayed" on page 5-5 for information
regarding error messages.
Refer to the “User's Guide (Copy Operations)” provided with the FK-502
for problems such as jamming of originals, paper jams, poor image
quality or running out of toner.
Check Points Corrective Actions
Is the transmission procedure cor-
rect? Check the transmission procedure and then try sending
again.
Is the FAX number of the destina-
tion being called correct? Are pro-
gram dialing or abbreviated
dialing numbers registered cor-
rectly? Using program dialing or abbreviated dialing, there may
be an error in registration of the FAX number. Try printing
out the Abbreviated Dialing List and check if the number
is registered correctly. Correct if there is an error in regis-
tration.
Is the telephone line setting cor-
rect? Does [Dialing Method] of [Telephone Line Settings] in the
Utility Mode match the telephone line being used? Check
the setting and correct if there is an error.
Is the telephone line connected
properly? Is the telephone line disconnected? Check the telephone
line connection and connect it if it is disconnected.
Is there a problem with the receiv-
ing machine? Is the power of the receiving facsimile turned off, is it out
of paper or is there another problem? Telephone the des-
tination and check if there is a problem.